PDA & Barcode Scanners | NetRay Rugged Handhelds

Keyboard PDAs

For teams that scan all day and still key in short entries. Both read 1D and 2D codes, use a 4-inch screen with a keypad, and have a removable 5,000 mAh battery. Optional accessories are listed per model in the comparison table.

MC62

Android 13 GMS
4-inch HD screen with a keypad
4 GB RAM / 64 GB storage, IP67
Removable 5,000 mAh battery

Ask about MC62

N75

NetRay N75 handheld PDA shown from the front and rear with a physical keypad and green scan key. — N75 keypad PDA for receiving, picking and stock checks.

Android 10
4-inch HD screen with a keypad
3 GB RAM / 32 GB storage, IP67
Removable 5,000 mAh battery

Ask about N75

Touchscreen PDAs

For WMS screens and operators who work by touch rather than a keypad. Both read 1D and 2D codes. Memory, battery and sealing differ, so they are not interchangeable.

MC95

Android 12 GMS, 5.5-inch touch screen
4 GB RAM / 64 GB storage
IP68
Removable 5,000 mAh battery

Ask about MC95

N90

NetRay N90 touchscreen PDA shown from the front, with the barcode scanning head and side scan key, and from the rear. — Front and rear views of the N90 touchscreen PDA with an integrated barcode scanning head.

Android 10, 5.7-inch touch screen
3 GB RAM / 32 GB storage
IP65
Built-in 4,800 mAh battery

Ask about N90

Cold-storage PDAs

Compare EP030 and iData K8 Cold for scanning and data entry in chilled and freezer environments. Choose by operating temperature, glove use and transitions between temperature zones.

A storage rating is not an operating rating. The comparison table lists both.

EP030 Cold

Android 9, 3.5-inch HD with a keypad
3 GB RAM / 32 GB storage, IP67
4,900 mAh removable low-temperature battery
Operating −25°C to 55°C

Ask about EP030 Cold

iData K8 Cold

Android 12 GMS, 4-inch glove-mode touch
4 GB RAM / 64 GB storage, IP68
6,700 mAh removable low-temperature battery
Operating −30°C to 50°C, with heating on the scan window and the display

Ask about K8 Cold

Handheld UHF RFID PDAs

Read multiple compatible RFID tags in batches for inventory counts, receiving checks and asset tracking.

Two C5P handheld UHF RFID readers with pistol grips and integrated antennas, one with a fingerprint sensor. — C5P handheld UHF RFID readers in touchscreen and optional fingerprint configurations.

C5P — Handheld UHF RFID PDA

The C5P combines a C5 Android handheld with a UHF RFID module for mobile inventory and asset checks. Optional barcode scanning supports workflows that use both RFID tags and printed labels.

Android 11 / 13 configurations
Impinj E710-based UHF RFID module
Removable pistol-grip battery
Optional 1D / 2D barcode scanning

Read performance depends on the tags, materials and environment. Share your country and application so we can confirm the regional frequency, hardware options and software integration requirements.

Ask about C5P

Common UHF RFID applications

Warehouse Inventory
Inbound & Outbound
Asset Tracking
Tool Management
Linen Management
Jewelry Inventory

Optional UHF RFID tag samples are available for testing. Ask about tag samples

Barcode & ring scanners

Use these where a full PDA is more than the station needs. NX1 is a wired barcode scanner and NX2 is a wireless barcode scanner. The Mindeo CR40 is a Bluetooth ring scanner. All three read 1D and 2D codes.

NX1/NX2

Two views of the NetRay NX2 wireless barcode scanner, including one seated in a base. — NX1 is the wired barcode scanner. NX2 is the wireless barcode scanner, shown here with a base. Confirm the included accessories for your configuration.

NX1 — wired barcode scanner
NX2 — wireless barcode scanner
Both read 1D and 2D codes for a pack bench, induction or a quality-check station

Ask about NX1/NX2

Mindeo CR40

Bluetooth ring scanner for hands-free picking and packing
Reads 1D and 2D codes

Ask about CR40

Label printers often paired with these

Printing is not built into the PDAs above. At a pack bench, teams often add a label printer and check the scan before the label is applied. Specs below are the ones already published for that station.

NetRay T45 — USB and Bluetooth, 203 DPI, 20–108 mm width, 150 mm/s.
iDPRT iD4S — USB and Wi-Fi, ZPL, 300 DPI, 20–108 mm width, 150 mm/s.

See them on the packing station

Model comparison

Taken from the 2026 handheld PDA comparison list. Optional accessories are not included with the device. For handheld RFID, see the C5P section above.

	MC62	N75	MC95	N90	EP030 Cold	K8 Cold
Best for	High-volume scan plus short keypad entry	Lower-cost keyboard PDA	Larger touch screen, WMS clients	Touchscreen scanning for indoor warehouse workflows	Freezer and chilled rooms	Freezer rooms, glove use, zone changes
System	Android 13 GMS	Android 10	Android 12 GMS	Android 10	Android 9	Android 12 GMS
Screen	4-inch HD, keypad	4-inch HD, keypad	5.5-inch HD, touch	5.7-inch HD, touch	3.5-inch HD, keypad	4-inch IPS HD, glove-mode touch
Scan	1D / 2D	1D / 2D	1D / 2D	1D / 2D	1D / 2D	1D / 2D, heating on the scan window and the display
Memory	4 GB RAM / 64 GB storage	3 GB RAM / 32 GB storage	4 GB RAM / 64 GB storage	3 GB RAM / 32 GB storage	3 GB RAM / 32 GB storage	4 GB RAM / 64 GB storage
Sealing	IP67	IP67	IP68	IP65	IP67	IP68
Battery	5,000 mAh, removable	5,000 mAh, removable	5,000 mAh, removable	4,800 mAh, built-in	4,900 mAh, low-temperature, removable	6,700 mAh, low-temperature, removable
Temperature	Not a cold-room model	Not a cold-room model	Not a cold-room model	Not a cold-room model	Operating −25°C to 55°C. Storage −40°C to 70°C.	Operating −30°C to 50°C. Storage −40°C to 70°C.
Accessories (Optional)	Pistol grip, cradle, rubber case, screen protector, spare battery, etc.	Screen protector, spare battery, etc.	Pistol grip, cradle, rubber case, screen protector, spare battery, etc.	Rubber case, screen protector, etc.	Screen protector, spare battery, etc.	Rubber case, screen protector, spare battery, etc.

Which handheld fits the job?

Tell us how many devices you need, where they will be used and which application they must work with. For RFID projects, include your country, tag type and whether you also need barcode scanning.